Pipe perforating
CNC machines
BEMA SHARP 80 CUT-PUNCH CNC – one of the most advanced pipe perforating equipment in the metal processing market:
- Perforation of pipe holes of different forms and dimensions;
- Product holes, the quantity of which is indicated in the drawing, can be located in the right place;
- Perforate both square and rectangular tubes;
- After the input of product data the distance between perforated holes and their quantity is controlled by computer;
- Extremely short preparation to cut different holes and tube profile replacement time;
- The machine can simultaneously perforate holes in all the relevant sides of the pipe;
- Perforating accuracy depends on the rate of perforation: 0.1÷ 0.5mm;
- Possible to perforate black metal, stainless steel, and brass tubes;
- Prepared pipe dimensions: max. 80x100mm, min. 20x20mm;
- Max. length of perforated part – 4000mm;
- Feed speed: up to 70 m/min.
Programmed eccentric press
„AROSVERKEN“
Technical specifications:
- Forms pipe holes of different forms and dimensions;
- Simultaneously perforates three pipes through one or two pipe walls;
- Possible to perforate the desirable quantity of holes and locates them into places, indicated by drawings;
- Perforates both square and rectangular pipes;
- After the input of product data the distance between punched holes and their quantity is controlled by computer;
- Possible to cut holes of different form after changing stamp for the previously perforated pipe;
- Perforation accuracy: 0.3mm;
- Possible to perforate black metal, stainless steel, and brass tubes;
- Prepared pipe dimensions: max. 120x120mm, min. 20x20mm;
- Max. length of perforated part – 3000mm.
